Merge pull request #355 from bogdando/issues/26

Add etcd proxy support

docs/ansible.md

@@ -4,14 +4,14 @@ Ansible variables
 
 Inventory
 -------------
-The inventory is composed of 3 groups: 
+The inventory is composed of 3 groups:
 
 * **kube-node** : list of kubernetes nodes where the pods will run.
-* **kube-master** : list of servers where kubernetes master components (apiserver, scheduler, controller) will run. 
+* **kube-master** : list of servers where kubernetes master components (apiserver, scheduler, controller) will run.
   Note: if you want the server to act both as master and node the server must be defined on both groups _kube-master_ and _kube-node_
 * **etcd**: list of server to compose the etcd server. you should have at least 3 servers for failover purposes.
 
-Below is a complete inventory example: 
+Below is a complete inventory example:
 
 ```
 ## Configure 'ip' variable to bind kubernetes services on a

inventory/group_vars/all.yml

@@ -51,6 +51,23 @@ cluster_name: cluster.local
 # but don't know about that address themselves.
 # access_ip: 1.1.1.1
 
+# Service endpoints. May be a VIP or a load balanced frontend IP, like one
+# that a HAProxy or Nginx provides, or just a local service endpoint.
+#
+# Etcd endpoints use a local etcd-proxies to reach the etcd cluster via
+# auto-evaluated endpoints. Those will reuse the access_ip for etcd cluster,
+# if specified, or defer to the localhost:2379 as well.
+
+# Etcd access modes:
+# Enable multiaccess to configure clients to access all of the etcd members directly
+# as the "http://hostX:port, http://hostY:port, ..." and ignore the proxy loadbalancers.
+# This may be the case if clients support and loadbalance multiple etcd servers  natively.
+etcd_multiaccess: false
+
+#
+# TODO apiserver localhost:8080 and localhost:443 endpoints for kubelets and
+# (hyper)kube-* and networking components.
+
 # Choose network plugin (calico, weave or flannel)
 kube_network_plugin: flannel
 

roles/etcd/handlers/main.yml

@@ -6,6 +6,13 @@
     - start etcd
     - reload etcd
 
+- name: restart etcd-proxy
+  command: /bin/true
+  notify:
+    - reload systemd
+    - start etcd-proxy
+    - reload etcd-proxy
+
 - name: reload systemd
   command: systemctl daemon-reload
   when: ansible_service_mgr == "systemd"
@@ -15,8 +22,23 @@
     name: etcd
     enabled: yes
     state: started
+  when: is_etcd_master
+
+- name: start etcd-proxy
+  service:
+    name: etcd-proxy
+    enabled: yes
+    state: started
+  when: is_etcd_proxy
 
 - name: reload etcd
   service:
     name: etcd
     state: "{{ 'restarted' if etcd_deployment_type == 'host' else 'reloaded' }}"
+  when: is_etcd_master
+
+- name: reload etcd-proxy
+  service:
+    name: etcd-proxy
+    state: "{{ 'restarted' if etcd_deployment_type == 'host' else 'reloaded' }}"
+  when: is_etcd_proxy

roles/etcd/tasks/configure.yml

@@ -15,7 +15,7 @@
     src: "etcd-{{ etcd_deployment_type }}.service.j2"
     dest: /etc/systemd/system/etcd.service
     backup: yes
-  when: ansible_service_mgr == "systemd"
+  when: ansible_service_mgr == "systemd" and is_etcd_master
   notify: restart etcd
 
 - name: Configure | Write etcd initd script
@@ -24,5 +24,21 @@
     dest: /etc/init.d/etcd
     owner: root
     mode: 0755
-  when: ansible_service_mgr in ["sysvinit","upstart"] and ansible_os_family == "Debian"
+  when: ansible_service_mgr in ["sysvinit","upstart"] and ansible_os_family == "Debian" and is_etcd_master
   notify: restart etcd
+
+- name: Configure | Copy etcd-proxy.service systemd file
+  template:
+    src: "etcd-proxy-{{ etcd_deployment_type }}.service.j2"
+    dest: /etc/systemd/system/etcd-proxy.service
+    backup: yes
+  when: ansible_service_mgr == "systemd" and is_etcd_proxy
+  notify: restart etcd-proxy
+- name: Configure | Write etcd-proxy initd script
+  template:
+    src: "deb-etcd-proxy-{{ etcd_deployment_type }}.initd.j2"
+    dest: /etc/init.d/etcd-proxy
+    owner: root
+    mode: 0755
+  when: ansible_service_mgr in ["sysvinit","upstart"] and ansible_os_family == "Debian" and is_etcd_proxy
+  notify: restart etcd-proxy

roles/etcd/tasks/main.yml

@@ -8,7 +8,12 @@
 - name: Restart etcd if binary changed
   command: /bin/true
   notify: restart etcd
-  when: etcd_deployment_type == "host" and etcd_copy.stdout_lines
+  when: etcd_deployment_type == "host" and etcd_copy.stdout_lines and is_etcd_master
+
+- name: Restart etcd-proxy if binary changed
+  command: /bin/true
+  notify: restart etcd-proxy
+  when: etcd_deployment_type == "host" and etcd_copy.stdout_lines and is_etcd_proxy
 
 # Reload systemd before starting service
 - meta: flush_handlers
@@ -18,6 +23,14 @@
     name: etcd
     state: started
     enabled: yes
+  when: is_etcd_master
+
+- name: Ensure etcd-proxy is running
+  service:
+    name: etcd-proxy
+    state: started
+    enabled: yes
+  when: is_etcd_proxy
 
 # After etcd cluster is assembled, make sure that
 # initial state of the cluster is in `existing`

roles/etcd/tasks/refresh_config.yml

@@ -4,3 +4,11 @@
     src: etcd.j2
     dest: /etc/etcd.env
   notify: restart etcd
+  when: is_etcd_master
+
+- name: Refresh config | Create etcd-proxy config file
+  template:
+    src: etcd-proxy.j2
+    dest: /etc/etcd-proxy.env
+  notify: restart etcd-proxy
+  when: is_etcd_proxy

roles/etcd/tasks/set_facts.yml

 ---
-- set_fact: etcd_access_address="{{ access_ip | default(ip | default(ansible_default_ipv4['address'])) }}"
+- set_fact: etcd_address="{{ ip | default(ansible_default_ipv4['address']) }}"
+- set_fact: etcd_access_address="{{ access_ip | default(etcd_address) }}"
 - set_fact: etcd_peer_url="http://{{ etcd_access_address }}:2380"
 - set_fact: etcd_client_url="http://{{ etcd_access_address }}:2379"
+- set_fact: etcd_authority="{{ access_ip|default('127.0.0.1') }}:2379"
+- set_fact: etcd_endpoint="http://{{ etcd_authority }}"
 - set_fact:
     etcd_access_addresses: |-
       {% for item in groups['etcd'] -%}
         http://{{ hostvars[item].etcd_access_address }}:2379{% if not loop.last %},{% endif %}
       {%- endfor %}
+- set_fact: etcd_access_endpoint="{% if etcd_multiaccess %}{{ etcd_access_addresses }}{% else %}{{ etcd_endpoint }}{% endif %}"
 - set_fact:
     etcd_member_name: |-
       {% for host in groups['etcd'] %}
       {%   if inventory_hostname == host %}{{"etcd"+loop.index|string }}{% endif %}
       {% endfor %}
+- set_fact:
+    etcd_proxy_member_name: |-
+      {% for host in groups['k8s-cluster'] %}
+      {%   if inventory_hostname == host %}{{"etcd-proxy"+loop.index|string }}{% endif %}
+      {% endfor %}
+- set_fact:
+    is_etcd_proxy: "{{ inventory_hostname in groups['k8s-cluster'] }}"
 - set_fact:
     is_etcd_master: "{{ inventory_hostname in groups['etcd'] }}"
 - set_fact:

roles/etcd/templates/deb-etcd-docker.initd.j2

@@ -16,23 +16,16 @@ PATH=/sbin:/usr/sbin:/bin/:/usr/bin
 DESC="etcd k/v store"
 NAME=etcd
 DAEMON={{ docker_bin_dir | default("/usr/bin") }}/docker
-{% if is_etcd_master %}
 DAEMON_ARGS='--restart=always --env-file=/etc/etcd.env \
 --net=host \
 -v /usr/share/ca-certificates/:/etc/ssl/certs:ro \
 -v /var/lib/etcd:/var/lib/etcd:rw \
---name={{ etcd_member_name | default("etcd-proxy") }} \
+--name={{ etcd_member_name | default("etcd") }} \
 {{ etcd_image_repo }}:{{ etcd_image_tag }} \
 {% if etcd_after_v3 %}
-{{ etcd_container_bin_dir }}etcd \
-{% endif %}
-{% if is_etcd_master %}
---proxy off
-{% else %}
---proxy on
+{{ etcd_container_bin_dir }}etcd
 {% endif %}'
 
-
 SCRIPTNAME=/etc/init.d/$NAME
 DAEMON_USER=etcd
 STOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"
@@ -41,9 +34,6 @@ PID=/var/run/etcd.pid
 # Exit if the binary is not present
 [ -x "$DAEMON" ] || exit 0
 
-# Read configuration variable file if it is present
-[ -f /etc/etcd.env ] && . /etc/etcd.env
-
 # Define LSB log_* functions.
 # Depend on lsb-base (>= 3.2-14) to ensure that this file is present
 # and status_of_proc is working.

roles/etcd/templates/deb-etcd-host.initd.j2

@@ -16,11 +16,6 @@ PATH=/sbin:/usr/sbin:/bin:/usr/bin
 DESC="etcd k/v store"
 NAME=etcd
 DAEMON={{ bin_dir }}/etcd
-{% if is_etcd_master %}
-DAEMON_ARGS=""
-{% else %}
-DAEMON_ARGS="--proxy on"
-{% endif %}
 SCRIPTNAME=/etc/init.d/$NAME
 DAEMON_USER=etcd
 STOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"

roles/etcd/templates/deb-etcd-proxy-docker.initd.j2

+#!/bin/sh
+set -a
+
+### BEGIN INIT INFO
+# Provides:   etcd-proxy
+# Required-Start:    $local_fs $network $syslog
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: etcd-proxy
+# Description:
+#   etcd-proxy is a proxy for etcd: distributed, consistent key-value store for shared configuration and service discovery
+### END INIT INFO
+
+PATH=/sbin:/usr/sbin:/bin/:/usr/bin
+DESC="etcd-proxy"
+NAME=etcd-proxy
+DAEMON={{ docker_bin_dir | default("/usr/bin") }}/docker
+DAEMON_ARGS='--restart=always --env-file=/etc/etcd-proxy.env \
+--net=host \
+--stop-signal=SIGKILL \
+-v /usr/share/ca-certificates/:/etc/ssl/certs:ro \
+--name={{ etcd_proxy_member_name | default("etcd-proxy") }} \
+{{ etcd_image_repo }}:{{ etcd_image_tag }} \
+{% if etcd_after_v3 %}
+{{ etcd_container_bin_dir }}etcd
+{% endif %}'
+
+
+SCRIPTNAME=/etc/init.d/$NAME
+DAEMON_USER=etcd-proxy
+STOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"
+PID=/var/run/etcd-proxy.pid
+
+# Exit if the binary is not present
+[ -x "$DAEMON" ] || exit 0
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+do_status()
+{
+    status_of_proc -p $PID "$DAEMON" "$NAME" && exit 0 || exit $?
+}
+
+# Function that starts the daemon/service
+#
+do_start()
+{
+    start-stop-daemon --background --start --quiet --make-pidfile --pidfile $PID --user $DAEMON_USER --exec $DAEMON -- \
+        $DAEMON_ARGS \
+        || return 2
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+    start-stop-daemon --stop --quiet --retry=$STOP_SCHEDULE --pidfile $PID --name $NAME
+    RETVAL="$?"
+
+    sleep 1
+    return "$RETVAL"
+}
+
+
+case "$1" in
+  start)
+        log_daemon_msg "Starting $DESC" "$NAME"
+        do_start
+        case "$?" in
+                0|1) log_end_msg 0 || exit 0 ;;
+                2) log_end_msg 1 || exit 1 ;;
+        esac
+        ;;
+  stop)
+        log_daemon_msg "Stopping $DESC" "$NAME"
+        if do_stop; then
+            log_end_msg 0
+        else
+            log_failure_msg "Can't stop etcd-proxy"
+            log_end_msg 1
+        fi
+        ;;
+  status)
+        if do_status; then
+            log_end_msg 0
+        else
+            log_failure_msg "etcd-proxy is not running"
+            log_end_msg 1
+        fi
+        ;;
+
+  restart|force-reload)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+        if do_stop; then
+            if do_start; then
+                log_end_msg 0
+                exit 0
+            else
+                rc="$?"
+            fi
+        else
+           rc="$?"
+        fi
+        log_failure_msg "Can't restart etcd-proxy"
+        log_end_msg ${rc}
+        ;;
+  *)
+        echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+        exit 3
+        ;;
+esac
+

roles/etcd/templates/deb-etcd-proxy-host.initd.j2

+#!/bin/sh
+set -a
+
+### BEGIN INIT INFO
+# Provides:   etcd-proxy
+# Required-Start:    $local_fs $network $syslog
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: etcd-proxy
+# Description:
+#   etcd-proxy is a proxy for etcd: distributed, consistent key-value store for shared configuration and service discovery
+### END INIT INFO
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="etcd-proxy"
+NAME=etcd-proxy
+DAEMON={{ bin_dir }}/etcd
+DAEMON_ARGS=""
+SCRIPTNAME=/etc/init.d/$NAME
+DAEMON_USER=etcd
+STOP_SCHEDULE="${STOP_SCHEDULE:-QUIT/5/TERM/5/KILL/5}"
+PID=/var/run/etcd-proxy.pid
+
+# Exit if the binary is not present
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -f /etc/etcd-proxy.env ] && . /etc/etcd-proxy.env
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+do_status()
+{
+    status_of_proc -p $PID "$DAEMON" "$NAME" && exit 0 || exit $?
+}
+
+# Function that starts the daemon/service
+#
+do_start()
+{
+    start-stop-daemon --background --start --quiet --make-pidfile --pidfile $PID --user $DAEMON_USER --exec $DAEMON -- \
+        $DAEMON_ARGS \
+        || return 2
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+    start-stop-daemon --stop --quiet --retry=$STOP_SCHEDULE --pidfile $PID --name $NAME
+    RETVAL="$?"
+
+    sleep 1
+    return "$RETVAL"
+}
+
+
+case "$1" in
+  start)
+        log_daemon_msg "Starting $DESC" "$NAME"
+        do_start
+        case "$?" in
+                0|1) log_end_msg 0 || exit 0 ;;
+                2) log_end_msg 1 || exit 1 ;;
+        esac
+        ;;
+  stop)
+        log_daemon_msg "Stopping $DESC" "$NAME"
+        if do_stop; then
+            log_end_msg 0
+        else
+            log_failure_msg "Can't stop etcd-proxy"
+            log_end_msg 1
+        fi
+        ;;
+  status)
+        if do_status; then
+            log_end_msg 0
+        else
+            log_failure_msg "etcd-proxy is not running"
+            log_end_msg 1
+        fi
+        ;;
+
+  restart|force-reload)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+        if do_stop; then
+            if do_start; then
+                log_end_msg 0
+                exit 0
+            else
+                rc="$?"
+            fi
+        else
+           rc="$?"
+        fi
+        log_failure_msg "Can't restart etcd-proxy"
+        log_end_msg ${rc}
+        ;;
+  *)
+        echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+        exit 3
+        ;;
+esac
+

roles/etcd/templates/etcd-docker.service.j2

 [Unit]
 Description=etcd docker wrapper
-Requires=docker.service
+Wants=docker.service
 After=docker.service
 
 [Service]
@@ -13,15 +13,10 @@ ExecStart={{ docker_bin_dir | default("/usr/bin") }}/docker run --restart=always
 --net=host \
 -v /usr/share/ca-certificates/:/etc/ssl/certs:ro \
 -v /var/lib/etcd:/var/lib/etcd:rw \
---name={{ etcd_member_name | default("etcd-proxy") }} \
+--name={{ etcd_member_name | default("etcd") }} \
 {{ etcd_image_repo }}:{{ etcd_image_tag }} \
 {% if etcd_after_v3 %}
-{{ etcd_container_bin_dir }}etcd \
-{% endif %}
-{% if is_etcd_master %}
---proxy off
-{% else %}
---proxy on
+{{ etcd_container_bin_dir }}etcd
 {% endif %}
 ExecStartPre=-{{ docker_bin_dir | default("/usr/bin") }}/docker rm -f {{ etcd_member_name | default("etcd-proxy") }}
 ExecReload={{ docker_bin_dir | default("/usr/bin") }}/docker restart {{ etcd_member_name | default("etcd-proxy") }}

roles/etcd/templates/etcd-host.service.j2

@@ -6,11 +6,7 @@ After=network.target
 Type=notify
 User=etcd
 EnvironmentFile=/etc/etcd.env
-{% if inventory_hostname in groups['etcd'] %}
 ExecStart={{ bin_dir }}/etcd
-{% else %}
-ExecStart={{ bin_dir }}/etcd -proxy on
-{% endif %}
 NotifyAccess=all
 Restart=always
 RestartSec=10s

roles/etcd/templates/etcd-proxy-docker.service.j2

+[Unit]
+Description=etcd-proxy docker wrapper
+Wants=docker.service
+After=docker.service
+
+[Service]
+User=root
+PermissionsStartOnly=true
+ExecStart={{ docker_bin_dir | default("/usr/bin") }}/docker run --restart=always \
+--env-file=/etc/etcd-proxy.env \
+{# TODO(mattymo): Allow docker IP binding and disable in envfile
+   -p 2380:2380 -p 2379:2379 #}
+--net=host \
+--stop-signal=SIGKILL \
+-v /usr/share/ca-certificates/:/etc/ssl/certs:ro \
+--name={{ etcd_proxy_member_name | default("etcd-proxy") }} \
+{{ etcd_image_repo }}:{{ etcd_image_tag }} \
+{% if etcd_after_v3 %}
+{{ etcd_container_bin_dir }}etcd
+{% endif %}
+ExecStartPre=-{{ docker_bin_dir | default("/usr/bin") }}/docker rm -f {{ etcd_proxy_member_name | default("etcd-proxy") }}
+ExecReload={{ docker_bin_dir | default("/usr/bin") }}/docker restart {{ etcd_proxy_member_name | default("etcd-proxy") }}
+ExecStop={{ docker_bin_dir | default("/usr/bin") }}/docker stop {{ etcd_proxy_member_name | default("etcd-proxy") }}
+Restart=always
+RestartSec=10s
+
+[Install]
+WantedBy=multi-user.target

roles/etcd/templates/etcd-proxy-host.service.j2

+[Unit]
+Description=etcd-proxy
+After=network.target
+
+[Service]
+Type=notify
+User=etcd
+PermissionsStartOnly=true
+EnvironmentFile=/etc/etcd-proxy.env
+ExecStart={{ bin_dir }}/etcd
+ExecStartPre=/bin/mkdir -p /var/lib/etcd-proxy
+ExecStartPre=/bin/chown -R etcd: /var/lib/etcd-proxy
+NotifyAccess=all
+Restart=always
+RestartSec=10s
+LimitNOFILE=40000
+
+[Install]
+WantedBy=multi-user.target

roles/etcd/templates/etcd-proxy.j2

+ETCD_DATA_DIR=/var/lib/etcd-proxy
+ETCD_PROXY=on
+ETCD_LISTEN_CLIENT_URLS={{ etcd_access_endpoint }}
+ETCD_NAME={{ etcd_proxy_member_name | default("etcd-proxy") }}
+ETCD_INITIAL_CLUSTER={% for host in groups['etcd'] %}etcd{{ loop.index|string }}={{ hostvars[host]['etcd_peer_url'] }}{% if not loop.last %},{% endif %}{% endfor %}

roles/etcd/templates/etcd.j2

 ETCD_DATA_DIR=/var/lib/etcd
-{% if is_etcd_master %}
-ETCD_ADVERTISE_CLIENT_URLS=http://{{ hostvars[inventory_hostname]['access_ip'] | default(hostvars[inventory_hostname]['ip'] | default( hostvars[inventory_hostname]['ansible_default_ipv4']['address'])) }}:2379
-ETCD_INITIAL_ADVERTISE_PEER_URLS=http://{{ hostvars[inventory_hostname]['access_ip'] | default(hostvars[inventory_hostname]['ip'] | default( hostvars[inventory_hostname]['ansible_default_ipv4']['address']))  }}:2380
+ETCD_ADVERTISE_CLIENT_URLS={{ etcd_client_url }}
+ETCD_INITIAL_ADVERTISE_PEER_URLS={{ etcd_peer_url }}
 ETCD_INITIAL_CLUSTER_STATE={% if etcd_cluster_is_healthy.rc != 0 | bool %}new{% else %}existing{% endif %}
 
+ETCD_LISTEN_CLIENT_URLS=http://{{ etcd_address }}:2379
 ETCD_ELECTION_TIMEOUT=10000
 ETCD_INITIAL_CLUSTER_TOKEN=k8s_etcd
-ETCD_LISTEN_PEER_URLS=http://{{ hostvars[inventory_hostname]['ip'] | default( hostvars[inventory_hostname]['ansible_default_ipv4']['address'])  }}:2380
+ETCD_LISTEN_PEER_URLS=http://{{ etcd_address }}:2380
 ETCD_NAME={{ etcd_member_name }}
-{% endif %}
+ETCD_PROXY=off
 ETCD_INITIAL_CLUSTER={% for host in groups['etcd'] %}etcd{{ loop.index|string }}={{ hostvars[host]['etcd_peer_url'] }}{% if not loop.last %},{% endif %}{% endfor %}
-
-ETCD_LISTEN_CLIENT_URLS=http://{{ hostvars[inventory_hostname]['ip'] | default( hostvars[inventory_hostname]['ansible_default_ipv4']['address'])  }}:2379,http://127.0.0.1:2379

roles/kubernetes/master/templates/kube-apiserver.j2

@@ -27,7 +27,7 @@ KUBE_API_INSECURE_BIND="--insecure-bind-address={{ kube_apiserver_insecure_bind_
 KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range={{ kube_service_addresses }}"
 
 # Location of the etcd cluster
-KUBE_ETCD_SERVERS="--etcd_servers={% for host in groups['etcd'] %}http://{{ hostvars[host]['access_ip'] | default(hostvars[host]['ip'] | default(hostvars[host]['ansible_default_ipv4']['address'])) }}:2379{% if not loop.last %},{% endif %}{% endfor %}"
+KUBE_ETCD_SERVERS="--etcd_servers={{ etcd_access_endpoint }}"
 
 # Bind address for secure endpoint
 KUBE_API_ADDRESS="--bind-address={{ ip | default(ansible_default_ipv4.address) }}"

roles/kubernetes/master/templates/kube-apiserver.service.j2

 [Unit]
 Description=Kubernetes API Server
 Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-Requires=etcd.service
-After=etcd.service
+Wants=etcd-proxy.service
+After=etcd-proxy.service
 
 [Service]
 EnvironmentFile=/etc/kubernetes/kube-apiserver.env

roles/kubernetes/master/templates/manifests/kube-apiserver.manifest.j2

@@ -11,7 +11,7 @@ spec:
     - /hyperkube
     - apiserver
     - --advertise-address={{ ip | default(ansible_default_ipv4.address) }}
-    - --etcd-servers={% for srv in groups['etcd'] %}http://{{ hostvars[srv]['access_ip'] | default(hostvars[srv]['ip']|default(hostvars[srv]['ansible_default_ipv4']['address'])) }}:2379{% if not loop.last %},{% endif %}{% endfor %}
+    - --etcd-servers={{ etcd_access_endpoint }}
     - --admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota
     - --service-cluster-ip-range={{ kube_service_addresses }}
     - --client-ca-file={{ kube_cert_dir }}/ca.pem