Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Do not repeat options and nameservers in the dhclient hooks.
Do not prepend nameservers for dhclient but supersede and fail back
to the upstream_dns_resolvers then default_resolver. Fixes order of
nameservers placement, which is cluster DNS ip goes always first.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

* For Debian/RedHat OS families (with NetworkManager/dhclient/resolvconf
  optionally enabled) prepend /etc/resolv.conf with required nameservers,
  options, and supersede domain and search domains via the dhclient/resolvconf
  hooks.

* Drop (z)nodnsupdate dhclient hook and re-implement it to complement the
  resolvconf -u command, which is distro/cloud provider specific.
  Update docs as well.

* Enable network restart to apply and persist changes and simplify handlers
  to rely on network restart only. This fixes DNS resolve for hostnet K8s
  pods for Red Hat OS family. Skip network restart for canal/calico plugins,
  unless https://github.com/projectcalico/felix/issues/1185

 fixed.

* Replace linefiles line plus with_items to block mode as it's faster.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>

In order to enable offline/intranet installation cases:
* Move DNS/resolvconf configuration to preinstall role. Remove
  skip_dnsmasq_k8s var as not needed anymore.

* Preconfigure DNS stack early, which may be the case when downloading
  artifacts from intranet repositories. Do not configure
  K8s DNS resolvers for hosts /etc/resolv.conf yet early (as they may be
  not existing).

* Reconfigure K8s DNS resolvers for hosts only after kubedns/dnsmasq
  was set up and before K8s apps to be created.

* Move docker install task to early stage as well and unbind it from the
  etcd role's specific install path. Fix external flannel dependency on
  docker role handlers. Also fix the docker restart handlers' steps
  ordering to match the expected sequence (the socket then the service).

* Add default resolver fact, which is
  the cloud provider specific and remove hardcoded GCE resolver.

* Reduce default ndots for hosts /etc/resolv.conf to 2. Multiple search
  domains combined with high ndots values lead to poor performance of
  DNS stack and make ansible workers to fail very often with the
  "Timeout (12s) waiting for privilege escalation prompt:" error.

* Update docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Add upload tag allow users to exclude distributing images across nodes
when running with the download tag set.
Add related tags and update docs as well.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Add tags to allow more granular tasks filtering.
Add generator script for MD formatted tags found.
Add docs for tags how-to.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Override GCE sysctl in /etc/sysctl.d/99-sysctl.conf instead of
the /etc/sysctl.d/11-gce-network-security.conf. It is recreated
by GCE, f.e. if gcloud CLI invokes some security related changes,
thus losing customizations we want to be persistent.

Update cloud providers firewall requirements in calico docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

In new `calicoctl` version nodes peering with routers is broken.
We need to use predictable node names for calico-node and the
same names in calico `bgpPeer` resources and CNI.

Reduce the test cases from 15 to 9, bearing in mind that:
* Disable weave/coreos gate unless its deployment fixed
* If debian/centos7 fails with net plugin X, ubuntu-xenial/rhel-7 will
  likely fail as well
* Canal also covers the flannel plugin deployment, but keep at least one
  of the flannel plugin deployment, unless it's superseded and removed.
* Keep at least one of each OS/plugin family to be tested in the separate
  nodes layout
* Keep at least one of each OS family to be tested against each of the
  plugin types in default nodes layout
* Rebalance GCE regions for instances, replace asia to eu/us as they
  are the longest running jobs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

* Add an option to deploy K8s app to test e2e network connectivity
  and cluster DNS resolve via Kubedns for nethost/simple pods
  (defaults to false).
* Parametrize existing k8s apps templates with kube_namespace and
  kube_config_dir instead of hardcode.
* For CoreOS, ensure nameservers from inventory to be put in the
  first place to allow hostnet pods connectivity via short names
  or FQDN and hostnet agents to pass as well, if netchecker
  deployed.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

* Add dns_replicas, dns_memory/cpu_limit/requests vars for
dns related apps.
* When kube_log_level=4, log dnsmasq queries as well.
* Add log level control for skydns (part of kubedns app).
* Add limits/requests vars for dnsmasq (part of kubedns app) and
  dnsmasq daemon set.
* Drop string defaults for kube_log_level as it is int and
  is defined in the global vars as well.
* Add docs

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

When download_run_once with download_localhost is used, docker is
expected to be running on the delegate localhost. That may be not
the case for a non localhost delegate, which is the kube-master
otherwise. Then the dnsmasq role, had it been invoked early before
deployment starts, would fail because of the missing docker dependency.

* Fix that dependency on docker and do not pre download dnsmasq image
  for the dnsmasq role, if download_localhost is disabled.
* Remove become: false for docker CLI invocation because that's not
  the common pattern to allow users access docker CLI w/o sudo.
* Fix opt bin path hack for localhost delegate to ignore errors when
  it fails with "sudo password required" otherwise.
* Describe download_run_once with download_localhost use case in docs
  as well.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

This patch introduce `calico_network_backend` global variable,
which allow to describe alternative network backend.
Default behavior is unchanged.

For Travis CI and GCE, add a naive generator script into a markdown table.
Add GCE/Travis CI matrix docs.
Add CoreOS test cases.
Rework existing cases w/o loosing of coverage.
Rework postinstall tests to support CoreOS as well.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Since version 'v1.0.0-beta' calicoctl is written
in Go and its API differs from old Python based
utility. Added support of both old and new version
of the utility.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Fix mismatch in code and docs, see
https://github.com/kubespray/kargo/pull/528



Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Also adds all masters by hostname and localhost/127.0.0.1 to
apiserver SSL certificate.

Includes documentation update on how localhost loadbalancer works.

* Add a var for ndots (default 5) and put it hosts' /etc/resolv.conf.
* Poke kube dns container image to v1.7
* In order to apply changes to kubelet, notify it to
be restarted on changes made to /etc/resolv.conf. Ignore errors as the kubelet
may yet to be present up to the moment of the notification being processed.
* Remove unnecessary kubelet restart for master role as the node role ensures
it is up and running. Notify master static pods waiters for apiserver,
scheduler, controller-manager instead.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Reflect changes made to DNS setup

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

- Update docs and a drawing to clarify DNS setup.
- Change order of nameservers placement to match
  changes in https://github.com/kubespray/kargo/pull/501



Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Change additional dnsmasq opts:
- Adjust caching size and TTL
- Disable resolve conf to not create loops
- Change dnsPolicy to default (similarly to kubedns's dnsmasq). The
  ClusterFirst should not be used to not create loops
- Disable negative NXDOMAIN replies to be cached
- Make its very installation as optional step (enabled by default).
  If you don't want more than 3 DNS servers, including 1 for K8s, disable
  it.
- Add docs and a drawing to clarify DNS setup.
- Fix stdout logs for dnsmasq/kubedns app configs
- Add missed notifies to resolvconf -u handler
- Fix idempotency of resolvconf head file changes

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Filename was a typo

* Add the retry_stagger var to tweak push and retry time strategies.
* Add large deployments related docs.

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

* Add HA docs for API server.
* Add auto-evaluated internal endpoints and clarify the loadbalancer_apiserver
vars and usecases.
* Use facts for kube_apiserver to not repeat code and enable LB endpoints use.
* Use /healthz check for the wait-for apiserver.
* Use the single endpoint for kubelet instead of the list of apiservers
* Specify kube_apiserver_count to for HA layout

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>

* Enforce a etcd-proxy role to a k8s-cluster group members. This
provides an HA layout for all of the k8s cluster internal clients.
* Proxies to be run on each node in the group as a separate etcd
instances with a readwrite proxy mode and listen the given endpoint,
which is either the access_ip:2379 or the localhost:2379.
* A notion for the 'kube_etcd_multiaccess' is: ignore endpoints and
loadbalancers and use the etcd members IPs as a comma-separated
list. Otherwise, clients shall use the local endpoint provided by a
etcd-proxy instances on each etcd node. A Netwroking plugins always
use that access mode.
* Fix apiserver's etcd servers args to use the etcd_access_endpoint.
* Fix networking plugins flannel/calico to use the etcd_endpoint.
* Fix name env var for non masters to be set as well.
* Fix etcd_client_url was not used anywhere and other etcd_* facts
evaluation was duplicated in a few places.
* Define proxy modes only in the env file, if not a master. Del
an automatic proxy mode decisions for etcd nodes in init/unit scripts.
* Use Wants= instead of Requires= as "This is the recommended way to
hook start-up of one unit to the start-up of another unit"
* Make apiserver/calico Wants= etcd-proxy to keep it always up

Signed-off-by: Bogdan Dobrelya <bdobrelia@mirantis.com>
Co-authored-by: Matthew Mosesohn <mmosesohn@mirantis.com>